DN63CF with 25 pin Sub-D High Current feedth.
501,00 € ex. VAT
Product description
1x HC variant Sub-D feedthrough 25 pin on DN63CF flange, For HV connectors the variant with rounded corners on the vacuum side is required!, max. 230°C
| Geometry Name | |
|---|---|
| Geometry according to Standard | |
| Vacuum Suitability | |
| Flange Type | |
| Flange Name | |
| Flange Material | |
| Flange Style | |
| Flange Thickness (mm) | |
| Min. Operating Temperature (°C) | |
| Max. Operating Temperature (°C) | |
| Max. Baking Temperature (°C) | |
| Vacuum Leak Rate | |
| Seal (Isolator) Material | |
| Feedthrough Housing Material | |
| Pluggable Connector | |
| Conductor Material | |
| Conductor Finish | |
| Conductor Diameter (mm) | |
| Conductor Gender Air Side | |
| Conductor Gender Vacuum Side | |
| Number of Pins (Total) | |
| Number of Pins per Feedthr. | |
| No. of Feedthroughs per Flange | |
| Max. Current per Pin (A) | |
| Max. Current per Pin <1 Minute | |
| Resistivity to Ground | |
| Maximum Working Voltage (V AC) |
